This is the latest recevied telemetry packets stored in our database for station/object LA2BSA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765845082 | 4.26 | 0.72 | 0 | 0 | 0 |
| 1765843274 | 4.33 | 0.72 | 0 | 0 | 0 |
| 1765841474 | 4.36 | 0.7 | 0 | 0 | 0 |
| 1765840582 | 4.33 | 0.72 | 0 | 0 | 0 |
| 1765838774 | 4.24 | 0.7 | 0 | 0 | 0 |
| 1765837874 | 4.34 | 0.7 | 0 | 0 | 0 |
| 1765836974 | 4.38 | 0.7 | 0 | 0 | 0 |
| 1765835174 | 4.25 | 0.7 | 0 | 0 | 0 |
| 1765834281 | 4.27 | 0.7 | 0 | 0 | 0 |
| 1765833374 | 4.29 | 0.7 | 0 | 0 | 0 |
| 1765832474 | 4.3 | 0.7 | 0 | 0 | 0 |
| 1765831574 | 4.31 | 0.72 | 0 | 0 | 0 |
| 1765830674 | 4.28 | 0.72 | 0 | 0 | 0 |
| 1765829773 | 4.23 | 0.7 | 0 | 0 | 0 |
| 1765828873 | 4.24 | 0.72 | 0 | 0 | 0 |
| 1765827973 | 4.35 | 0.7 | 0 | 0 | 0 |
| 1765827073 | 4.32 | 0.72 | 0 | 0 | 0 |
| 1765826173 | 4.37 | 0.72 | 0 | 0 | 0 |
| 1765825273 | 4.28 | 0.72 | 0 | 0 | 0 |
| 1765824372 | 4.36 | 0.7 | 0 | 0 | 0 |
| 1765823480 | 4.36 | 0.72 | 0 | 0 | 0 |
| 1765822572 | 4.24 | 0.7 | 0 | 0 | 0 |
| 1765821672 | 4.29 | 0.72 | 0 | 0 | 0 |
| 1765820780 | 4.32 | 0.7 | 0 | 0 | 0 |
| 1765819872 | 4.28 | 0.72 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)