This is the latest recevied telemetry packets stored in our database for station/object DK3RW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775200468 | 4.59 VDC | 0 | 0 | 0 | 0 |
| 1775199567 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1775198667 | 4.59 VDC | 0 | 0 | 0 | 0 |
| 1775197767 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1775196867 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1775195966 | 4.59 VDC | 0 | 0 | 0 | 0 |
| 1775195066 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1775194166 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1775193266 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1775192365 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1775191465 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1775190565 | 4.59 VDC | 0 | 0 | 0 | 0 |
| 1775189664 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1775188764 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1775187864 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1775186964 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1775186063 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1775185163 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1775184263 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1775183362 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1775182462 | 4.51 VDC | 0 | 0 | 0 | 0 |
| 1775181561 | 4.52 VDC | 0 | 0 | 0 | 0 |
| 1775180661 | 4.59 VDC | 0 | 0 | 0 | 0 |
| 1775179760 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1775178860 | 4.35 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)