This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-30. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775242363 | 4.51 VDC | 12.9 VDC | 0 | 0 | 0 |
| 1775241462 | 4.46 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1775240562 | 4.56 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1775239661 | 4.52 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1775238760 | 4.48 VDC | 12.98 VDC | 0 | 0 | 0 |
| 1775237860 | 4.47 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1775236959 | 4.51 VDC | 13 VDC | 0 | 0 | 0 |
| 1775234275 | 4.52 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1775233374 | 4.47 VDC | 13 VDC | 0 | 0 | 0 |
| 1775232474 | 4.47 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1775231573 | 4.54 VDC | 12.98 VDC | 0 | 0 | 0 |
| 1775230672 | 4.53 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1775229771 | 4.53 VDC | 12.96 VDC | 0 | 0 | 0 |
| 1775228871 | 4.55 VDC | 12.96 VDC | 0 | 0 | 0 |
| 1775227970 | 4.5 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1775227069 | 4.48 VDC | 12.94 VDC | 0 | 0 | 0 |
| 1775226169 | 4.45 VDC | 13 VDC | 0 | 0 | 0 |
| 1775225268 | 4.52 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1775224367 | 4.5 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1775223467 | 4.48 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1775222566 | 4.54 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1775221667 | 4.55 VDC | 12.48 VDC | 0 | 0 | 0 |
| 1775220763 | 4.48 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1775219862 | 4.5 VDC | 12.38 VDC | 0 | 0 | 0 |
| 1775218962 | 4.56 VDC | 12.44 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)