This is the latest recevied telemetry packets stored in our database for station/object AI0ET-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbatt* | Vsolar* | VbattTemp* | intTemp* | extTemp* |
|---|---|---|---|---|---|
| 1791116612 | 12.46 Volts | 0 Volts | 59 F | 74 F | 50 F |
| 1791116013 | 12.48 Volts | 0 Volts | 59 F | 74 F | 50 F |
| 1791115413 | 12.48 Volts | 0 Volts | 59 F | 75 F | 51 F |
| 1791114813 | 12.48 Volts | 0 Volts | 60 F | 75 F | 51 F |
| 1791114212 | 12.5 Volts | 0 Volts | 60 F | 75 F | 51 F |
| 1791113613 | 12.49 Volts | 0 Volts | 60 F | 75 F | 52 F |
| 1791113013 | 12.5 Volts | 0 Volts | 60 F | 76 F | 52 F |
| 1791112412 | 12.51 Volts | 0 Volts | 60 F | 76 F | 52 F |
| 1791111812 | 12.53 Volts | 0 Volts | 61 F | 76 F | 52 F |
| 1791111213 | 12.53 Volts | 0 Volts | 61 F | 76 F | 52 F |
| 1791110613 | 12.52 Volts | 0 Volts | 62 F | 77 F | 54 F |
| 1791110012 | 12.53 Volts | 0 Volts | 62 F | 77 F | 54 F |
| 1791109413 | 12.56 Volts | 0 Volts | 62 F | 77 F | 54 F |
| 1791108813 | 12.56 Volts | 0 Volts | 62 F | 78 F | 54 F |
| 1791108212 | 12.56 Volts | 0 Volts | 62 F | 79 F | 54 F |
| 1791107613 | 12.57 Volts | 0 Volts | 62 F | 79 F | 54 F |
| 1791107013 | 12.59 Volts | 0 Volts | 63 F | 79 F | 55 F |
| 1791106412 | 12.56 Volts | 0 Volts | 63 F | 79 F | 55 F |
| 1791105813 | 12.56 Volts | 0 Volts | 63 F | 79 F | 55 F |
| 1791105213 | 12.57 Volts | 0 Volts | 64 F | 79 F | 55 F |
| 1791104612 | 12.59 Volts | 0 Volts | 64 F | 80 F | 56 F |
| 1791104012 | 12.61 Volts | 0 Volts | 64 F | 80 F | 56 F |
| 1791103413 | 12.61 Volts | 0 Volts | 64 F | 80 F | 56 F |
| 1791102813 | 12.6 Volts | 0 Volts | 64 F | 80 F | 56 F |
| 1791102212 | 12.6 Volts | 0 Volts | 64 F | 81 F | 57 F |
*Used Equation Coefficients:
Vbatt: 0, 0.01, 0
Vsolar: 0, 0.01, 0
VbattTemp: 0, 1, 0
intTemp: 0, 1, 0
extTemp: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)