This is the latest recevied telemetry packets stored in our database for station/object S55DKN-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765009161 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1765008261 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1765007360 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1765006460 | 4.35 VDC | 13.94 VDC | 0 | 0 | 0 |
| 1765005560 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1765004660 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1765003760 | 4.36 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1765002860 | 4.36 VDC | 14 VDC | 0 | 0 | 0 |
| 1765001960 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1765001760 | 4.34 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1765001060 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1765000159 | 4.34 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1764999259 | 4.35 VDC | 13.96 VDC | 0 | 0 | 0 |
| 1764999117 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1764998531 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1764998357 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1764997457 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1764996557 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1764995656 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1764994756 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1764993856 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1764993580 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1764993300 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1764992956 | 4.35 VDC | 14 VDC | 0 | 0 | 0 |
| 1764992759 | 4.35 VDC | 13.98 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)