APRS Track Direct

My position About ☰

reset

CE3RCJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CE3RCJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*
1776782199	417	33
1776779506	416	33
1776774092	419	33
1776773192	416	33
1776772292	417	48
1776768691	419	34
1776766891	416	33
1776765991	419	33
1776764204	415	33
1776761491	416	47
1776758790	419	33
1776755190	419	33
1776754290	416	34
1776753390	418	33
1776748889	415	33
1776747989	419	35
1776747075	420	33
1776745260	417	34
1776744366	419	33
1776742566	416	34
1776740760	419	33
1776739860	415	33
1776738965	417	33
1776737165	415	46
1776735365	415	33

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)