This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765011180 | 252 Count | 117 Count | 99 Count | 4 VDC | 0 VDC |
| 1765009379 | 251 Count | 115 Count | 99 Count | 4 VDC | 0 VDC |
| 1765007578 | 249 Count | 111 Count | 98 Count | 4 VDC | 0 VDC |
| 1765005777 | 247 Count | 108 Count | 97 Count | 4 VDC | 0 VDC |
| 1765003976 | 245 Count | 107 Count | 96 Count | 4 VDC | 0 VDC |
| 1765002176 | 243 Count | 105 Count | 95 Count | 4 VDC | 0 VDC |
| 1765000375 | 242 Count | 104 Count | 95 Count | 4 VDC | 0 VDC |
| 1764998574 | 239 Count | 102 Count | 93 Count | 4 VDC | 0 VDC |
| 1764996773 | 238 Count | 102 Count | 93 Count | 4 VDC | 0 VDC |
| 1764994972 | 237 Count | 101 Count | 93 Count | 4 VDC | 0 VDC |
| 1764993181 | 236 Count | 100 Count | 93 Count | 4 VDC | 0 VDC |
| 1764991380 | 235 Count | 100 Count | 93 Count | 4 VDC | 0 VDC |
| 1764989579 | 234 Count | 100 Count | 93 Count | 4 VDC | 0 VDC |
| 1764987778 | 233 Count | 100 Count | 93 Count | 4 VDC | 0 VDC |
| 1764985977 | 232 Count | 100 Count | 93 Count | 4 VDC | 0 VDC |
| 1764984177 | 231 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764982376 | 230 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764980575 | 229 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764978774 | 228 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764976973 | 227 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764975172 | 226 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764973371 | 225 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764971581 | 224 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764969780 | 223 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764967979 | 222 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)