This is the latest recevied telemetry packets stored in our database for station/object EA4GMY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775203681 | 669 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775201875 | 667 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775199166 | 664 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775198335 | 659 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775197432 | 658 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775196529 | 657 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775195626 | 656 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775192014 | 652 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775191111 | 651 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775190207 | 650 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775189304 | 649 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775188401 | 648 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775187498 | 647 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775186595 | 646 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775185692 | 645 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775184789 | 644 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775181177 | 640 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775180274 | 639 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775175827 | 630 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775174924 | 629 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775173118 | 627 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775172215 | 626 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775168603 | 622 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775167700 | 621 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775165894 | 619 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)