This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765000312 | 474 Volts | 577 Deg.F | 353 | 0 | 0 |
| 1765000211 | 478 Volts | 574 Deg.F | 347 | 0 | 0 |
| 1765000089 | 475 Volts | 569 Deg.F | 361 | 0 | 0 |
| 1765000055 | 469 Volts | 570 Deg.F | 373 | 0 | 0 |
| 1764999335 | 472 Volts | 574 Deg.F | 347 | 0 | 0 |
| 1764999310 | 474 Volts | 573 Deg.F | 351 | 0 | 0 |
| 1764999162 | 470 Volts | 570 Deg.F | 372 | 0 | 0 |
| 1764998776 | 476 Volts | 565 Deg.F | 363 | 0 | 0 |
| 1764998750 | 474 Volts | 565 Deg.F | 366 | 0 | 0 |
| 1764988555 | 472 Volts | 591 Deg.F | 338 | 0 | 0 |
| 1764988539 | 476 Volts | 590 Deg.F | 345 | 0 | 0 |
| 1764988252 | 462 Volts | 588 Deg.F | 353 | 0 | 0 |
| 1764988067 | 460 Volts | 587 Deg.F | 347 | 0 | 0 |
| 1764987768 | 462 Volts | 585 Deg.F | 349 | 0 | 0 |
| 1764987468 | 471 Volts | 579 Deg.F | 348 | 0 | 0 |
| 1764987399 | 472 Volts | 577 Deg.F | 506 | 0 | 0 |
| 1764987379 | 469 Volts | 575 Deg.F | 363 | 0 | 0 |
| 1764983284 | 473 Volts | 586 Deg.F | 345 | 0 | 0 |
| 1764983073 | 468 Volts | 579 Deg.F | 348 | 0 | 0 |
| 1764983067 | 465 Volts | 579 Deg.F | 355 | 0 | 0 |
| 1764983047 | 467 Volts | 578 Deg.F | 361 | 0 | 0 |
| 1764982962 | 470 Volts | 577 Deg.F | 607 | 0 | 0 |
| 1764972930 | 447 Volts | 605 Deg.F | 340 | 0 | 0 |
| 1764972630 | 448 Volts | 605 Deg.F | 339 | 0 | 0 |
| 1764972332 | 450 Volts | 605 Deg.F | 338 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)