This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785857345 | 0 Count | 163 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1785856445 | 0 Count | 149 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1785855545 | 0 Count | 143 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1785854645 | 0 Count | 140 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1785853745 | 0 Count | 130 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1785852845 | 0 Count | 127 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1785851945 | 0 Count | 124 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1785851045 | 0 Count | 123 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1785850145 | 0 Count | 118 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1785849245 | 0 Count | 111 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1785848369 | 0 Count | 107 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1785847469 | 0 Count | 97 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1785846569 | 0 Count | 89 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1785845669 | 0 Count | 80 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1785844769 | 0 Count | 75 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1785843869 | 0 Count | 63 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1785842969 | 0 Count | 45 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1785840269 | 0 Count | 998 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1785839368 | 0 Count | 971 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1785838468 | 0 Count | 951 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1785837568 | 0 Count | 932 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1785836668 | 0 Count | 916 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1785835768 | 0 Count | 897 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1785834867 | 0 Count | 877 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1785833967 | 0 Count | 850 Count | 0 Count | 4.26 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)