This is the latest recevied telemetry packets stored in our database for station/object SANJUANWL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791151805 | 1172 | 0 | 0 | 0 | 0 |
| 1791148205 | 1176 | 0 | 0 | 0 | 0 |
| 1791144605 | 1175 | 0 | 0 | 0 | 0 |
| 1791142205 | 1174 | 0 | 0 | 0 | 0 |
| 1791141605 | 1174 | 0 | 0 | 0 | 0 |
| 1791141005 | 1174 | 0 | 0 | 0 | 0 |
| 1791140405 | 1174 | 0 | 0 | 0 | 0 |
| 1791139805 | 1174 | 0 | 0 | 0 | 0 |
| 1791139205 | 1174 | 0 | 0 | 0 | 0 |
| 1791138605 | 1174 | 0 | 0 | 0 | 0 |
| 1791138005 | 1175 | 0 | 0 | 0 | 0 |
| 1791137405 | 1175 | 0 | 0 | 0 | 0 |
| 1791136806 | 1175 | 0 | 0 | 0 | 0 |
| 1791136206 | 1176 | 0 | 0 | 0 | 0 |
| 1791135602 | 1177 | 0 | 0 | 0 | 0 |
| 1791135005 | 1178 | 0 | 0 | 0 | 0 |
| 1791134407 | 1178 | 0 | 0 | 0 | 0 |
| 1791133808 | 1179 | 0 | 0 | 0 | 0 |
| 1791133207 | 1180 | 0 | 0 | 0 | 0 |
| 1791132606 | 1181 | 0 | 0 | 0 | 0 |
| 1791132006 | 1182 | 0 | 0 | 0 | 0 |
| 1791131408 | 1183 | 0 | 0 | 0 | 0 |
| 1791130807 | 1183 | 0 | 0 | 0 | 0 |
| 1791130207 | 1180 | 0 | 0 | 0 | 0 |
| 1791126605 | 1145 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)