This is the latest recevied telemetry packets stored in our database for station/object TULLUGNG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765003210 | 1571 | 0 | 0 | 0 | 0 |
| 1765002607 | 1804 | 0 | 0 | 0 | 0 |
| 1765002006 | 2056 | 0 | 0 | 0 | 0 |
| 1765001409 | 2021 | 0 | 0 | 0 | 0 |
| 1765000807 | 1807 | 0 | 0 | 0 | 0 |
| 1765000207 | 1807 | 0 | 0 | 0 | 0 |
| 1764999607 | 2056 | 0 | 0 | 0 | 0 |
| 1764999010 | 2051 | 0 | 0 | 0 | 0 |
| 1764998410 | 1805 | 0 | 0 | 0 | 0 |
| 1764997809 | 1842 | 0 | 0 | 0 | 0 |
| 1764997206 | 1973 | 0 | 0 | 0 | 0 |
| 1764996008 | 1485 | 0 | 0 | 0 | 0 |
| 1764995407 | 2022 | 0 | 0 | 0 | 0 |
| 1764994807 | 1710 | 0 | 0 | 0 | 0 |
| 1764993607 | 1698 | 0 | 0 | 0 | 0 |
| 1764993007 | 1574 | 0 | 0 | 0 | 0 |
| 1764992407 | 1568 | 0 | 0 | 0 | 0 |
| 1764991806 | 1798 | 0 | 0 | 0 | 0 |
| 1764988809 | 1803 | 0 | 0 | 0 | 0 |
| 1764987608 | 1563 | 0 | 0 | 0 | 0 |
| 1764986407 | 1577 | 0 | 0 | 0 | 0 |
| 1764985206 | 2049 | 0 | 0 | 0 | 0 |
| 1764922209 | 1572 | 0 | 0 | 0 | 0 |
| 1764921607 | 1668 | 0 | 0 | 0 | 0 |
| 1764921007 | 1803 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)