This is the latest recevied telemetry packets stored in our database for station/object W9EN-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769655556 | 410 | 64 | 0 | 0 | 0 |
| 1769654656 | 410 | 64 | 0 | 0 | 0 |
| 1769653756 | 410 | 64 | 0 | 0 | 0 |
| 1769652856 | 410 | 64 | 0 | 0 | 0 |
| 1769651955 | 410 | 64 | 0 | 0 | 0 |
| 1769651055 | 411 | 64 | 0 | 0 | 0 |
| 1769650155 | 411 | 72 | 0 | 0 | 0 |
| 1769649255 | 411 | 264 | 0 | 0 | 0 |
| 1769648355 | 411 | 240 | 0 | 0 | 0 |
| 1769647455 | 412 | 272 | 0 | 0 | 0 |
| 1769646554 | 412 | 916 | 0 | 0 | 0 |
| 1769645654 | 412 | 979 | 0 | 0 | 0 |
| 1769644754 | 413 | 1005 | 0 | 0 | 0 |
| 1769643854 | 413 | 1009 | 0 | 0 | 0 |
| 1769642954 | 414 | 1002 | 0 | 0 | 0 |
| 1769642053 | 414 | 1023 | 0 | 0 | 0 |
| 1769641153 | 415 | 272 | 0 | 0 | 0 |
| 1769640253 | 414 | 1039 | 0 | 0 | 0 |
| 1769639353 | 414 | 1030 | 0 | 0 | 0 |
| 1769638453 | 417 | 1027 | 0 | 0 | 0 |
| 1769637552 | 418 | 1027 | 0 | 0 | 0 |
| 1769636652 | 419 | 1041 | 0 | 0 | 0 |
| 1769635752 | 419 | 1059 | 0 | 0 | 0 |
| 1769634852 | 420 | 1050 | 0 | 0 | 0 |
| 1769633952 | 421 | 1038 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)