This is the latest recevied telemetry packets stored in our database for station/object SM0JLZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791102219 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1791091818 | 3.08 VDC | 0 | 0 | 0 | 0 |
| 1791090918 | 3.15 VDC | 0 | 0 | 0 | 0 |
| 1791090018 | 3.21 VDC | 0 | 0 | 0 | 0 |
| 1791089117 | 3.25 VDC | 0 | 0 | 0 | 0 |
| 1791088217 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1791087317 | 3.32 VDC | 0 | 0 | 0 | 0 |
| 1791086417 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1791085517 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1791084617 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1791083717 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1791082817 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1791081920 | 3.4 VDC | 0 | 0 | 0 | 0 |
| 1791080991 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1791080091 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1791079191 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1791078291 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1791077391 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1791076491 | 3.48 VDC | 0 | 0 | 0 | 0 |
| 1791075591 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1791074691 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1791073791 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1791072891 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1791071991 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1791071091 | 3.55 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)