This is the latest recevied telemetry packets stored in our database for station/object V85AFF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765022579 | 370 | 6 | 0 | 0 | 0 |
| 1765021679 | 362 | 6 | 0 | 0 | 0 |
| 1765020779 | 370 | 6 | 0 | 0 | 0 |
| 1765018978 | 363 | 6 | 0 | 0 | 0 |
| 1765018078 | 364 | 6 | 0 | 0 | 0 |
| 1765017178 | 366 | 6 | 0 | 0 | 0 |
| 1765016278 | 366 | 6 | 0 | 0 | 0 |
| 1765015377 | 370 | 6 | 0 | 0 | 0 |
| 1765014477 | 367 | 6 | 0 | 0 | 0 |
| 1765013577 | 362 | 6 | 0 | 0 | 0 |
| 1765012677 | 365 | 6 | 0 | 0 | 0 |
| 1765011777 | 363 | 6 | 0 | 0 | 0 |
| 1765010876 | 363 | 6 | 0 | 0 | 0 |
| 1765009976 | 363 | 6 | 0 | 0 | 0 |
| 1765009076 | 367 | 6 | 0 | 0 | 0 |
| 1765008176 | 365 | 6 | 0 | 0 | 0 |
| 1765007275 | 365 | 6 | 0 | 0 | 0 |
| 1765006375 | 368 | 6 | 0 | 0 | 0 |
| 1765005475 | 373 | 6 | 0 | 0 | 0 |
| 1765004575 | 369 | 6 | 0 | 0 | 0 |
| 1765003675 | 369 | 6 | 0 | 0 | 0 |
| 1765002774 | 368 | 6 | 0 | 0 | 0 |
| 1765001874 | 369 | 6 | 0 | 0 | 0 |
| 1765000974 | 371 | 6 | 0 | 0 | 0 |
| 1765000074 | 369 | 6 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)