This is the latest recevied telemetry packets stored in our database for station/object SA5KJA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785878745 | 0.86 VDC | 0 | 0 | 0 | 0 |
| 1785877844 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785876944 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785876043 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785875143 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785874241 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785873341 | 0.8 VDC | 0 | 0 | 0 | 0 |
| 1785872441 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785871540 | 0.82 VDC | 0 | 0 | 0 | 0 |
| 1785870640 | 0.8 VDC | 0 | 0 | 0 | 0 |
| 1785869739 | 0.78 VDC | 0 | 0 | 0 | 0 |
| 1785868839 | 0.76 VDC | 0 | 0 | 0 | 0 |
| 1785867935 | 0.72 VDC | 0 | 0 | 0 | 0 |
| 1785867033 | 0.7 VDC | 0 | 0 | 0 | 0 |
| 1785866133 | 0.66 VDC | 0 | 0 | 0 | 0 |
| 1785865232 | 0.7 VDC | 0 | 0 | 0 | 0 |
| 1785864331 | 0.68 VDC | 0 | 0 | 0 | 0 |
| 1785863430 | 0.68 VDC | 0 | 0 | 0 | 0 |
| 1785862529 | 0.66 VDC | 0 | 0 | 0 | 0 |
| 1785861629 | 0.7 VDC | 0 | 0 | 0 | 0 |
| 1785860728 | 0.66 VDC | 0 | 0 | 0 | 0 |
| 1785859828 | 0.66 VDC | 0 | 0 | 0 | 0 |
| 1785858927 | 0.74 VDC | 0 | 0 | 0 | 0 |
| 1785858026 | 0.7 VDC | 0 | 0 | 0 | 0 |
| 1785857126 | 0.7 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)