This is the latest recevied telemetry packets stored in our database for station/object WB0RZS-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765031912 | 338 | 0 | 0 | 0 | 0 |
| 1765029856 | 330 | 0 | 0 | 0 | 0 |
| 1765008272 | 320 | 0 | 0 | 0 | 0 |
| 1765007371 | 324 | 0 | 0 | 0 | 0 |
| 1765006471 | 327 | 0 | 0 | 0 | 0 |
| 1765005571 | 332 | 0 | 0 | 0 | 0 |
| 1765004671 | 335 | 0 | 0 | 0 | 0 |
| 1765003771 | 338 | 0 | 0 | 0 | 0 |
| 1765002871 | 340 | 0 | 0 | 0 | 0 |
| 1765001971 | 341 | 0 | 0 | 0 | 0 |
| 1765001071 | 342 | 0 | 0 | 0 | 0 |
| 1765000170 | 344 | 0 | 0 | 0 | 0 |
| 1764999270 | 346 | 0 | 0 | 0 | 0 |
| 1764998370 | 347 | 0 | 0 | 0 | 0 |
| 1764997470 | 348 | 0 | 0 | 0 | 0 |
| 1764996570 | 349 | 0 | 0 | 0 | 0 |
| 1764995661 | 350 | 0 | 0 | 0 | 0 |
| 1764994761 | 352 | 0 | 0 | 0 | 0 |
| 1764993861 | 353 | 0 | 0 | 0 | 0 |
| 1764992961 | 353 | 0 | 0 | 0 | 0 |
| 1764992061 | 353 | 0 | 0 | 0 | 0 |
| 1764991161 | 353 | 0 | 0 | 0 | 0 |
| 1764990260 | 354 | 0 | 0 | 0 | 0 |
| 1764989361 | 354 | 0 | 0 | 0 | 0 |
| 1764988460 | 354 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)