This is the latest recevied telemetry packets stored in our database for station/object SP6YY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764999098 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764998196 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764997294 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764996393 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764995491 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764994589 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764993687 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764992784 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764991882 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764990980 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764990078 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764989176 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764988275 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764987373 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764986471 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764985569 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764984667 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764983764 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764982862 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764982425 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764981523 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764980621 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764979719 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764978817 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
| 1764977915 | 1.57 VDC | 0.54 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)