This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791199407 | 259 Count | 1004 Count | 244 Count | 4.08 VDC | 0 VDC |
| 1791197606 | 211 Count | 888 Count | 197 Count | 4.09 VDC | 0 VDC |
| 1791195813 | 189 Count | 827 Count | 180 Count | 4.09 VDC | 0 VDC |
| 1791194013 | 177 Count | 780 Count | 169 Count | 4.08 VDC | 0 VDC |
| 1791192212 | 166 Count | 739 Count | 159 Count | 4.12 VDC | 0 VDC |
| 1791190411 | 133 Count | 628 Count | 127 Count | 4.08 VDC | 0 VDC |
| 1791188611 | 98 Count | 541 Count | 93 Count | 4.1 VDC | 0 VDC |
| 1791186810 | 83 Count | 490 Count | 79 Count | 4.1 VDC | 0 VDC |
| 1791185009 | 66 Count | 433 Count | 63 Count | 4.13 VDC | 0 VDC |
| 1791183208 | 50 Count | 352 Count | 48 Count | 4.08 VDC | 0 VDC |
| 1791176005 | 119 Count | 856 Count | 110 Count | 4.11 VDC | 0 VDC |
| 1791174213 | 94 Count | 716 Count | 90 Count | 4.08 VDC | 0 VDC |
| 1791170612 | 54 Count | 438 Count | 52 Count | 4.07 VDC | 0 VDC |
| 1791168811 | 33 Count | 299 Count | 32 Count | 4.1 VDC | 0 VDC |
| 1791167010 | 15 Count | 132 Count | 15 Count | 4.11 VDC | 0 VDC |
| 1791165209 | 246 Count | 1079 Count | 230 Count | 4.08 VDC | 0 VDC |
| 1791163409 | 230 Count | 937 Count | 215 Count | 4.08 VDC | 0 VDC |
| 1791161608 | 214 Count | 837 Count | 200 Count | 4.08 VDC | 0 VDC |
| 1791159807 | 197 Count | 749 Count | 184 Count | 4.09 VDC | 0 VDC |
| 1791156206 | 163 Count | 617 Count | 152 Count | 4.08 VDC | 0 VDC |
| 1791154405 | 147 Count | 546 Count | 137 Count | 4.09 VDC | 0 VDC |
| 1791152612 | 124 Count | 479 Count | 119 Count | 4.08 VDC | 0 VDC |
| 1791150812 | 105 Count | 405 Count | 101 Count | 4.1 VDC | 0 VDC |
| 1791149011 | 82 Count | 312 Count | 79 Count | 4.1 VDC | 0 VDC |
| 1791147210 | 60 Count | 231 Count | 58 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)