This is the latest recevied telemetry packets stored in our database for station/object V85AFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775222781 | 3.68 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1775221881 | 3.69 VDC | 4.88 VDC | 0 | 0 | 0 |
| 1775220981 | 3.67 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1775220081 | 3.67 VDC | 4.76 VDC | 0 | 0 | 0 |
| 1775219180 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775218280 | 3.67 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775217380 | 3.68 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1775216480 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775215579 | 3.67 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775214679 | 3.67 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1775213779 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775212879 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1775211978 | 3.68 VDC | 4.96 VDC | 0 | 0 | 0 |
| 1775211078 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1775210177 | 3.68 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1775209277 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775208377 | 3.68 VDC | 5.02 VDC | 0 | 0 | 0 |
| 1775207477 | 3.68 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1775206576 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775205676 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
| 1775204776 | 3.68 VDC | 4.86 VDC | 0 | 0 | 0 |
| 1775203876 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775202975 | 3.68 VDC | 4.92 VDC | 0 | 0 | 0 |
| 1775202075 | 3.68 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1775201175 | 3.68 VDC | 4.94 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)