This is the latest recevied telemetry packets stored in our database for station/object M8TEJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769671131 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769670231 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1769669331 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1769668431 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769667530 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769666630 | 4.27 VDC | 0 | 0 | 0 | 0 |
| 1769665730 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1769664830 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1769663930 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769663030 | 4.27 VDC | 0 | 0 | 0 | 0 |
| 1769662130 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769661230 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1769660330 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1769659429 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769658529 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769657629 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1769656729 | 4.27 VDC | 0 | 0 | 0 | 0 |
| 1769655829 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1769654929 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769654029 | 4.27 VDC | 0 | 0 | 0 | 0 |
| 1769653129 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1769652229 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1769651328 | 4.27 VDC | 0 | 0 | 0 | 0 |
| 1769650428 | 4.27 VDC | 0 | 0 | 0 | 0 |
| 1769649528 | 4.26 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)