This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780628607 | 21 Count | 217 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1780627706 | 20 Count | 207 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1780626805 | 19 Count | 197 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1780625905 | 18 Count | 186 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1780625004 | 17 Count | 177 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1780624103 | 16 Count | 167 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1780623202 | 15 Count | 157 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1780622301 | 14 Count | 148 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1780621401 | 13 Count | 138 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1780620499 | 12 Count | 128 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1780619598 | 11 Count | 118 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1780618698 | 10 Count | 108 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1780617797 | 9 Count | 99 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1780616896 | 8 Count | 89 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1780615995 | 7 Count | 78 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1780615094 | 6 Count | 68 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1780614194 | 5 Count | 58 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1780613293 | 4 Count | 48 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1780612392 | 3 Count | 38 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1780611491 | 2 Count | 28 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1780610591 | 1 Count | 18 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1780609690 | 0 Count | 8 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1780608789 | 97 Count | 1009 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1780607888 | 96 Count | 999 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1780606988 | 95 Count | 990 Count | 0 Count | 4.17 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)