This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765002384 | 127 | 34 | 26 | 417 | 0 |
| 1765001483 | 125 | 33 | 25 | 417 | 0 |
| 1765000582 | 123 | 32 | 24 | 419 | 0 |
| 1764999681 | 121 | 31 | 23 | 422 | 0 |
| 1764998780 | 119 | 30 | 22 | 417 | 0 |
| 1764997879 | 117 | 29 | 21 | 422 | 0 |
| 1764996978 | 115 | 28 | 20 | 419 | 0 |
| 1764996077 | 114 | 28 | 20 | 419 | 0 |
| 1764995176 | 112 | 27 | 19 | 420 | 0 |
| 1764994275 | 110 | 26 | 18 | 421 | 0 |
| 1764993375 | 109 | 26 | 18 | 421 | 0 |
| 1764992474 | 108 | 26 | 18 | 418 | 0 |
| 1764991573 | 107 | 24 | 18 | 420 | 0 |
| 1764990672 | 105 | 23 | 17 | 420 | 0 |
| 1764989771 | 103 | 22 | 16 | 422 | 0 |
| 1764988870 | 102 | 22 | 16 | 420 | 0 |
| 1764987970 | 100 | 21 | 15 | 419 | 0 |
| 1764987069 | 99 | 21 | 15 | 418 | 0 |
| 1764986168 | 98 | 21 | 15 | 420 | 0 |
| 1764985267 | 97 | 21 | 15 | 420 | 0 |
| 1764984366 | 96 | 21 | 15 | 419 | 0 |
| 1764983465 | 95 | 21 | 15 | 418 | 0 |
| 1764982565 | 93 | 20 | 14 | 420 | 0 |
| 1764981664 | 91 | 19 | 13 | 419 | 0 |
| 1764980763 | 90 | 19 | 13 | 419 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)