This is the latest recevied telemetry packets stored in our database for station/object SP6PCL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769669476 | 735 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769667676 | 734 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769665875 | 733 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769664075 | 732 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769662274 | 731 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769660473 | 730 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769658673 | 729 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769656872 | 728 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769655071 | 727 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769653271 | 726 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769651470 | 725 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769649677 | 724 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769647876 | 723 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769646075 | 722 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769644275 | 721 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769642474 | 720 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769640673 | 719 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769638873 | 718 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769637072 | 717 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769635271 | 716 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769633471 | 715 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769631670 | 714 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769629869 | 713 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769628077 | 712 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769626276 | 711 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)