This is the latest recevied telemetry packets stored in our database for station/object KH6LOL-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791089712 | 479 | 635 | 0 | 0 | 0 |
| 1791089035 | 476 | 625 | 0 | 0 | 0 |
| 1791045701 | 417 | 615 | 0 | 0 | 0 |
| 1791045402 | 417 | 615 | 0 | 0 | 0 |
| 1791045103 | 417 | 615 | 0 | 0 | 0 |
| 1791044804 | 418 | 615 | 0 | 0 | 0 |
| 1791044505 | 418 | 615 | 0 | 0 | 0 |
| 1791044206 | 417 | 615 | 0 | 0 | 0 |
| 1791043609 | 418 | 616 | 0 | 0 | 0 |
| 1791043310 | 418 | 615 | 0 | 0 | 0 |
| 1791043011 | 418 | 615 | 0 | 0 | 0 |
| 1791042712 | 418 | 615 | 0 | 0 | 0 |
| 1791042413 | 419 | 615 | 0 | 0 | 0 |
| 1791042114 | 419 | 616 | 0 | 0 | 0 |
| 1791041815 | 418 | 618 | 0 | 0 | 0 |
| 1791041516 | 419 | 622 | 0 | 0 | 0 |
| 1791041056 | 478 | 615 | 0 | 0 | 0 |
| 1791041031 | 479 | 615 | 0 | 0 | 0 |
| 1791040921 | 481 | 615 | 0 | 0 | 0 |
| 1791040832 | 480 | 614 | 0 | 0 | 0 |
| 1791040742 | 480 | 612 | 0 | 0 | 0 |
| 1791040690 | 479 | 612 | 0 | 0 | 0 |
| 1791040616 | 479 | 609 | 0 | 0 | 0 |
| 1791040431 | 474 | 602 | 0 | 0 | 0 |
| 1791040403 | 477 | 602 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)