This is the latest recevied telemetry packets stored in our database for station/object DO7LM-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769666518 | 3.67 V | 40 | 0 | 0 | 0 |
| 1769665700 | 3.88 V | 33 | 0 | 0 | 0 |
| 1769665583 | 3.9 V | 31 | 0 | 0 | 0 |
| 1769665466 | 3.91 V | 23 | 0 | 0 | 0 |
| 1769665350 | 3.91 V | 21 | 0 | 0 | 0 |
| 1769665233 | 3.92 V | 20 | 0 | 0 | 0 |
| 1769612414 | 3.9 V | 19 | 0 | 0 | 0 |
| 1769612298 | 3.9 V | 13 | 0 | 0 | 0 |
| 1769612180 | 3.91 V | 12 | 0 | 0 | 0 |
| 1769612063 | 3.92 V | 13 | 0 | 0 | 0 |
| 1769611946 | 3.91 V | 30 | 0 | 0 | 0 |
| 1769611829 | 3.92 V | 26 | 0 | 0 | 0 |
| 1769611712 | 3.91 V | 30 | 0 | 0 | 0 |
| 1769611595 | 3.92 V | 29 | 0 | 0 | 0 |
| 1769611478 | 3.71 V | 30 | 0 | 0 | 0 |
| 1769610893 | 3.95 V | 29 | 0 | 0 | 0 |
| 1769610777 | 3.97 V | 23 | 0 | 0 | 0 |
| 1769610660 | 3.96 V | 18 | 0 | 0 | 0 |
| 1769610543 | 3.87 V | 11 | 0 | 0 | 0 |
| 1769598898 | 4.25 V | 13 | 0 | 0 | 0 |
| 1769598664 | 4.25 V | 17 | 0 | 0 | 0 |
| 1769598547 | 4.23 V | 15 | 0 | 0 | 0 |
| 1769598313 | 4.24 V | 15 | 0 | 0 | 0 |
| 1769598196 | 4.22 V | 14 | 0 | 0 | 0 |
| 1769597962 | 4.22 V | 15 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)