This is the latest recevied telemetry packets stored in our database for station/object G1MEI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1780598793 | 3.57 VDC | 21.9 C | 42.41 % | 1007.13 hPa | 0 |
| 1780589767 | 3.68 VDC | 26.3 C | 41.26 % | 1002.88 hPa | 0 |
| 1780580885 | 3.92 VDC | 24.2 C | 42.95 % | 1000.88 hPa | 0 |
| 1780577643 | 3.94 VDC | 26.2 C | 31.85 % | 996 hPa | 0 |
| 1780577390 | 3.93 VDC | 25.9 C | 32.55 % | 999.75 hPa | 0 |
| 1780575458 | 3.82 VDC | 22.5 C | 42.01 % | 997.13 hPa | 0 |
| 1780574921 | 3.79 VDC | 20.4 C | 49.26 % | 998.5 hPa | 0 |
| 1780568050 | 3.68 VDC | 19.2 C | 46.82 % | 997.63 hPa | 0 |
| 1780560784 | 3.95 VDC | 18.2 C | 46.87 % | 998 hPa | 0 |
| 1780556010 | 3.79 VDC | 16.6 C | 46.51 % | 999.13 hPa | 0 |
| 1780546984 | 3.88 VDC | 16.2 C | 45.65 % | 996.88 hPa | 0 |
| 1780537959 | 4 VDC | 16.9 C | 43.91 % | 994.88 hPa | 0 |
| 1780530558 | 4.05 VDC | 17.4 C | 42.73 % | 997.75 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)