This is the latest recevied telemetry packets stored in our database for station/object OK4AB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786114942 | 29.1 C | 52.49 % | 1022.13 hPa | 0 | 0 |
| 1786114039 | 29 C | 52.07 % | 1020.88 hPa | 0 | 0 |
| 1786113134 | 28.9 C | 51.56 % | 1021.63 hPa | 0 | 0 |
| 1786112230 | 28.8 C | 51.74 % | 1022.63 hPa | 0 | 0 |
| 1786111326 | 28.7 C | 50.4 % | 1022.25 hPa | 0 | 0 |
| 1786110424 | 28.5 C | 50.32 % | 1022.75 hPa | 0 | 0 |
| 1786109520 | 28.2 C | 49.16 % | 1022.38 hPa | 0 | 0 |
| 1786108615 | 28 C | 47.79 % | 1023.13 hPa | 0 | 0 |
| 1786107712 | 27.7 C | 46.86 % | 1023.13 hPa | 0 | 0 |
| 1786106808 | 27.5 C | 45.05 % | 1022.75 hPa | 0 | 0 |
| 1786105906 | 27.4 C | 45.48 % | 1023.63 hPa | 0 | 0 |
| 1786105001 | 27.2 C | 45.97 % | 1023.13 hPa | 0 | 0 |
| 1786104099 | 27.2 C | 47.46 % | 1023.5 hPa | 0 | 0 |
| 1786103195 | 27.1 C | 47.5 % | 1023.63 hPa | 0 | 0 |
| 1786102292 | 27 C | 46.96 % | 1023.25 hPa | 0 | 0 |
| 1786101388 | 26.9 C | 47.72 % | 1022.63 hPa | 0 | 0 |
| 1786100486 | 26.8 C | 46.79 % | 1023.5 hPa | 0 | 0 |
| 1786099582 | 26.8 C | 46.56 % | 1024.25 hPa | 0 | 0 |
| 1786098679 | 26.7 C | 48.5 % | 1023.88 hPa | 0 | 0 |
| 1786097776 | 26.6 C | 48.52 % | 1023.38 hPa | 0 | 0 |
| 1786096872 | 26.4 C | 47.84 % | 1023.13 hPa | 0 | 0 |
| 1786095968 | 26.1 C | 47.3 % | 1024.13 hPa | 0 | 0 |
| 1786095064 | 25.7 C | 46.46 % | 1024 hPa | 0 | 0 |
| 1786093256 | 25.5 C | 46.17 % | 1024.38 hPa | 0 | 0 |
| 1786092353 | 25.4 C | 46.61 % | 1023.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)