This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1775484135 | 4.19 VDC | 25.8 C | 38.01 % | 1024 hPa | 0 |
| 1775483234 | 4.19 VDC | 25.8 C | 37.53 % | 1028.25 hPa | 0 |
| 1775482329 | 4.19 VDC | 25.9 C | 37.29 % | 1022.5 hPa | 0 |
| 1775481428 | 4.19 VDC | 25.9 C | 37.24 % | 1023.25 hPa | 0 |
| 1775480522 | 4.19 VDC | 25.9 C | 37.36 % | 1023.63 hPa | 0 |
| 1775479620 | 4.19 VDC | 25.9 C | 36.71 % | 1024.5 hPa | 0 |
| 1775478714 | 4.19 VDC | 25.9 C | 36.64 % | 1026.38 hPa | 0 |
| 1775477811 | 4.21 VDC | 26 C | 36.59 % | 1022.88 hPa | 0 |
| 1775476910 | 4.21 VDC | 26.1 C | 36.39 % | 1032.63 hPa | 0 |
| 1775476007 | 4.21 VDC | 26.3 C | 35.56 % | 1026.38 hPa | 0 |
| 1775475102 | 4.21 VDC | 26.7 C | 35.35 % | 1022 hPa | 0 |
| 1775474203 | 4.21 VDC | 27.2 C | 34.74 % | 1021.13 hPa | 0 |
| 1775472782 | 4.21 VDC | 28 C | 33.81 % | 1013.38 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)