This is the latest recevied telemetry packets stored in our database for station/object 9W4GOF-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764993840 | 4.04 | 29.9 | 1013.38 | 0 | 0 |
| 1764993774 | 4.04 | 29.9 | 1002.63 | 0 | 0 |
| 1764993542 | 4.05 | 29.8 | 994.13 | 0 | 0 |
| 1764993476 | 4.05 | 29.8 | 1003.63 | 0 | 0 |
| 1764993348 | 4.04 | 29.9 | 1013.13 | 0 | 0 |
| 1764993227 | 4.04 | 29.8 | 1023.5 | 0 | 0 |
| 1764992819 | 4.05 | 29.9 | 1002.75 | 0 | 0 |
| 1764992442 | 4.04 | 29.8 | 998.38 | 0 | 0 |
| 1764992276 | 4.05 | 29.9 | 1003.25 | 0 | 0 |
| 1764991373 | 4.04 | 29.5 | 1003.25 | 0 | 0 |
| 1764990470 | 4.04 | 29.4 | 1003.38 | 0 | 0 |
| 1764990167 | 4.05 | 29.4 | 1003.38 | 0 | 0 |
| 1764989640 | 4.05 | 29.2 | 1004 | 0 | 0 |
| 1764988732 | 4.05 | 29.1 | 1006.38 | 0 | 0 |
| 1764987883 | 4.05 | 29.1 | 1016.13 | 0 | 0 |
| 1764987244 | 4.05 | 29.1 | 1002.5 | 0 | 0 |
| 1764987001 | 4.04 | 29.1 | 987 | 0 | 0 |
| 1764986732 | 4.05 | 29 | 1003.63 | 0 | 0 |
| 1764986488 | 4.04 | 28.9 | 990.38 | 0 | 0 |
| 1764986366 | 4.05 | 28.9 | 984.38 | 0 | 0 |
| 1764986284 | 4.04 | 28.9 | 968.63 | 0 | 0 |
| 1764986237 | 4.04 | 28.9 | 975.38 | 0 | 0 |
| 1764986077 | 4.05 | 28.9 | 990.5 | 0 | 0 |
| 1764985900 | 4.06 | 28.9 | 1003.88 | 0 | 0 |
| 1764984997 | 4.05 | 28.9 | 1002.38 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)