This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775200332 | 595 Count | 184 Count | 180 Count | 3.39 VDC | 0.14 VDC |
| 1775191371 | 594 Count | 184 Count | 180 Count | 3.33 VDC | 0.14 VDC |
| 1775187765 | 591 Count | 182 Count | 178 Count | 3.37 VDC | 0.14 VDC |
| 1775184160 | 590 Count | 182 Count | 178 Count | 3.4 VDC | 0.14 VDC |
| 1775180555 | 589 Count | 182 Count | 178 Count | 3.45 VDC | 0.14 VDC |
| 1775176950 | 588 Count | 182 Count | 178 Count | 3.47 VDC | 0.14 VDC |
| 1775173375 | 587 Count | 182 Count | 178 Count | 3.47 VDC | 0.14 VDC |
| 1775169770 | 586 Count | 182 Count | 178 Count | 3.48 VDC | 0.14 VDC |
| 1775166165 | 585 Count | 182 Count | 178 Count | 3.48 VDC | 0.14 VDC |
| 1775162559 | 584 Count | 182 Count | 178 Count | 3.45 VDC | 0.14 VDC |
| 1775158954 | 583 Count | 182 Count | 178 Count | 3.46 VDC | 0.14 VDC |
| 1775155349 | 582 Count | 182 Count | 178 Count | 3.5 VDC | 0.14 VDC |
| 1775151774 | 581 Count | 182 Count | 178 Count | 3.47 VDC | 0.14 VDC |
| 1775148169 | 580 Count | 182 Count | 178 Count | 3.48 VDC | 0.14 VDC |
| 1775144564 | 579 Count | 182 Count | 178 Count | 3.52 VDC | 0.14 VDC |
| 1775140958 | 578 Count | 182 Count | 178 Count | 3.54 VDC | 0.14 VDC |
| 1775137353 | 573 Count | 178 Count | 174 Count | 3.54 VDC | 0.14 VDC |
| 1775133748 | 569 Count | 175 Count | 171 Count | 3.53 VDC | 0.14 VDC |
| 1775130174 | 564 Count | 171 Count | 167 Count | 3.5 VDC | 0.14 VDC |
| 1775126569 | 559 Count | 167 Count | 163 Count | 3.5 VDC | 0.14 VDC |
| 1775122964 | 555 Count | 164 Count | 160 Count | 3.52 VDC | 0.14 VDC |
| 1775119358 | 550 Count | 160 Count | 156 Count | 3.46 VDC | 0.14 VDC |
| 1775115753 | 543 Count | 154 Count | 150 Count | 3.4 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)