APRS Track Direct

My position About ☰

reset

F4MLV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	RX_rate*	RelRate*	DrpRate*
1791089072	4.19 VDC	112 pkt/h	64 pkt/h	48 pkt/h
1791088172	4.19 VDC	124 pkt/h	68 pkt/h	56 pkt/h
1791087272	4.19 VDC	100 pkt/h	44 pkt/h	56 pkt/h
1791086373	4.2 VDC	76 pkt/h	40 pkt/h	36 pkt/h
1791085475	4.19 VDC	102 pkt/h	39 pkt/h	63 pkt/h
1791084558	4.2 VDC	128 pkt/h	56 pkt/h	72 pkt/h
1791083659	4.19 VDC	132 pkt/h	64 pkt/h	68 pkt/h
1791082761	4.2 VDC	96 pkt/h	56 pkt/h	40 pkt/h
1791081862	4.2 VDC	120 pkt/h	56 pkt/h	64 pkt/h
1791080065	4.19 VDC	76 pkt/h	36 pkt/h	40 pkt/h
1791079167	4.19 VDC	116 pkt/h	60 pkt/h	56 pkt/h
1791078267	4.19 VDC	100 pkt/h	44 pkt/h	56 pkt/h
1791077367	4.2 VDC	119 pkt/h	52 pkt/h	68 pkt/h
1791076463	4.19 VDC	108 pkt/h	44 pkt/h	64 pkt/h
1791075565	4.2 VDC	96 pkt/h	40 pkt/h	56 pkt/h
1791074666	4.19 VDC	100 pkt/h	32 pkt/h	68 pkt/h
1791073766	4.18 VDC	112 pkt/h	48 pkt/h	64 pkt/h
1791072867	4.2 VDC	76 pkt/h	40 pkt/h	36 pkt/h
1791071969	4.21 VDC	116 pkt/h	52 pkt/h	64 pkt/h
1791071070	4.2 VDC	100 pkt/h	48 pkt/h	52 pkt/h
1791070171	4.19 VDC	120 pkt/h	40 pkt/h	80 pkt/h
1791069272	4.2 VDC	104 pkt/h	52 pkt/h	52 pkt/h
1791068374	4.19 VDC	128 pkt/h	48 pkt/h	80 pkt/h
1791067474	4.19 VDC	92 pkt/h	56 pkt/h	36 pkt/h
1791066577	4.21 VDC	104 pkt/h	52 pkt/h	52 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)