APRS Track Direct

My position About ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1780638006	37.42 °C	37.3 %RH	987.2 hPa	4.16 V
1780637406	37.09 °C	37.5 %RH	987.5 hPa	4.16 V
1780636805	36.81 °C	37.8 %RH	987.6 hPa	4.18 V
1780636205	36.51 °C	38.1 %RH	987.7 hPa	4.16 V
1780635605	36.43 °C	38.2 %RH	987.7 hPa	4.16 V
1780635005	36.4 °C	38.3 %RH	987.7 hPa	4.16 V
1780634405	36.18 °C	38.6 %RH	987.7 hPa	4.16 V
1780633805	36.43 °C	38.4 %RH	987.7 hPa	4.16 V
1780633205	36.26 °C	38.7 %RH	987.7 hPa	4.16 V
1780632605	35.89 °C	39.1 %RH	987.7 hPa	4.16 V
1780632005	35.58 °C	39.4 %RH	987.7 hPa	4.17 V
1780631405	35.51 °C	39.7 %RH	987.7 hPa	4.16 V
1780630805	35.41 °C	39.7 %RH	987.8 hPa	4.16 V
1780630205	35.44 °C	39.7 %RH	987.8 hPa	4.16 V
1780629605	35.69 °C	39.7 %RH	987.9 hPa	4.16 V
1780629005	35.62 °C	40 %RH	988 hPa	4.16 V
1780628407	35.42 °C	40.2 %RH	988.1 hPa	4.16 V
1780627805	35.45 °C	40.3 %RH	988.1 hPa	4.16 V
1780627205	35.44 °C	40.4 %RH	988.2 hPa	4.16 V
1780626605	35.18 °C	40.8 %RH	988.2 hPa	4.16 V
1780626005	35.05 °C	41 %RH	988.1 hPa	4.16 V
1780625405	35.08 °C	41.1 %RH	988 hPa	4.16 V
1780624805	35.01 °C	41.3 %RH	988 hPa	4.16 V
1780624205	34.69 °C	41.7 %RH	987.9 hPa	4.16 V
1780623605	34.68 °C	41.9 %RH	987.8 hPa	4.16 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)