This is the latest recevied telemetry packets stored in our database for station/object IU1VDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791119830 | 0 Count | 933 Count | 0 Count | 0 VDC | 0 VDC |
| 1791118930 | 0 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1791118030 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1791117130 | 0 Count | 918 Count | 0 Count | 0 VDC | 0 VDC |
| 1791116229 | 0 Count | 914 Count | 0 Count | 0 VDC | 0 VDC |
| 1791115329 | 0 Count | 910 Count | 0 Count | 0 VDC | 0 VDC |
| 1791114429 | 0 Count | 906 Count | 0 Count | 0 VDC | 0 VDC |
| 1791113529 | 0 Count | 904 Count | 0 Count | 0 VDC | 0 VDC |
| 1791112629 | 0 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1791111729 | 0 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1791110829 | 0 Count | 897 Count | 0 Count | 0 VDC | 0 VDC |
| 1791109929 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1791109029 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1791108129 | 0 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1791107229 | 0 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1791106329 | 0 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
| 1791105429 | 0 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
| 1791104529 | 0 Count | 887 Count | 0 Count | 0 VDC | 0 VDC |
| 1791103629 | 0 Count | 885 Count | 0 Count | 0 VDC | 0 VDC |
| 1791102730 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1791101830 | 0 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1791100930 | 0 Count | 875 Count | 0 Count | 0 VDC | 0 VDC |
| 1791100030 | 0 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1791099130 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1791098230 | 0 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)