This is the latest recevied telemetry packets stored in our database for station/object NM5ER-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780602960 | 429 | 0 | 0 | 0 | 0 |
| 1780602060 | 428 | 0 | 0 | 0 | 0 |
| 1780601159 | 429 | 0 | 0 | 0 | 0 |
| 1780600259 | 429 | 0 | 0 | 0 | 0 |
| 1780599359 | 429 | 0 | 0 | 0 | 0 |
| 1780598459 | 429 | 0 | 0 | 0 | 0 |
| 1780597559 | 430 | 0 | 0 | 0 | 0 |
| 1780596659 | 431 | 0 | 0 | 0 | 0 |
| 1780595758 | 430 | 0 | 0 | 0 | 0 |
| 1780594858 | 429 | 0 | 0 | 0 | 0 |
| 1780593958 | 427 | 0 | 0 | 0 | 0 |
| 1780593058 | 430 | 0 | 0 | 0 | 0 |
| 1780592158 | 429 | 0 | 0 | 0 | 0 |
| 1780591258 | 429 | 0 | 0 | 0 | 0 |
| 1780590357 | 427 | 0 | 0 | 0 | 0 |
| 1780589457 | 429 | 0 | 0 | 0 | 0 |
| 1780588557 | 429 | 0 | 0 | 0 | 0 |
| 1780587657 | 429 | 0 | 0 | 0 | 0 |
| 1780586757 | 427 | 0 | 0 | 0 | 0 |
| 1780585856 | 430 | 0 | 0 | 0 | 0 |
| 1780584956 | 431 | 0 | 0 | 0 | 0 |
| 1780584056 | 430 | 0 | 0 | 0 | 0 |
| 1780583156 | 426 | 0 | 0 | 0 | 0 |
| 1780582256 | 428 | 0 | 0 | 0 | 0 |
| 1780581356 | 430 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)