APRS Track Direct

My position About ☰

reset

SP2ROC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RPM*	VBAT*	TEMP*	TRIP*	MTH*
1791044068	853 rpm	12.92 V	36 degC	0 km	69 h
1791044038	755 rpm	12.92 V	34 degC	0 km	69 h
1791044008	755 rpm	12.85 V	33 degC	0 km	69 h
1791043977	755 rpm	12.85 V	31 degC	0 km	69 h
1791043948	752 rpm	12.86 V	30 degC	0 km	69 h
1791043918	750 rpm	12.84 V	29 degC	0 km	69 h
1791043888	752 rpm	12.85 V	28 degC	0 km	69 h
1791028143	800 rpm	14.6 V	66 degC	0.4 km	69 h
1791028113	945 rpm	14.43 V	66 degC	0.4 km	69 h
1791028083	905 rpm	14.46 V	66 degC	0.3 km	69 h
1791028053	905 rpm	14.41 V	66 degC	0.3 km	69 h
1791028023	845 rpm	14.55 V	66 degC	0.3 km	69 h
1791027933	1023 rpm	14.52 V	67 degC	0.3 km	69 h
1791027902	777 rpm	14.46 V	67 degC	0.3 km	69 h
1791027872	774 rpm	14.41 V	67 degC	0.3 km	69 h
1791027842	774 rpm	14.46 V	67 degC	0.3 km	69 h
1791027812	774 rpm	14.52 V	67 degC	0.3 km	69 h
1791027782	772 rpm	14.41 V	67 degC	0.3 km	69 h
1791027752	776 rpm	14.55 V	67 degC	0.3 km	69 h
1791027722	776 rpm	14.52 V	67 degC	0.3 km	69 h
1791027692	775 rpm	14.46 V	66 degC	0.3 km	69 h
1791027662	776 rpm	14.52 V	66 degC	0.3 km	69 h
1791027602	1261 rpm	14.53 V	66 degC	0.2 km	69 h
1791027542	1379 rpm	14.53 V	66 degC	0.2 km	69 h
1791027512	1368 rpm	14.52 V	65 degC	0.2 km	69 h

*Used Equation Coefficients:

RPM: 0, 1, 0

VBAT: 0, 0.01, 0

TEMP: 0, 1, -100

TRIP: 0, 0.1, 0

MTH: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)