This is the latest recevied telemetry packets stored in our database for station/object SP8C-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791093166 | 0 Count | 53 Count | 0 Count | 0 VDC | 0 VDC |
| 1791091366 | 0 Count | 51 Count | 0 Count | 0 VDC | 0 VDC |
| 1791089566 | 0 Count | 49 Count | 0 Count | 0 VDC | 0 VDC |
| 1791087766 | 0 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1791085966 | 0 Count | 45 Count | 0 Count | 0 VDC | 0 VDC |
| 1791084165 | 0 Count | 43 Count | 0 Count | 0 VDC | 0 VDC |
| 1791082365 | 0 Count | 41 Count | 0 Count | 0 VDC | 0 VDC |
| 1791080565 | 0 Count | 39 Count | 0 Count | 0 VDC | 0 VDC |
| 1791078764 | 0 Count | 37 Count | 0 Count | 0 VDC | 0 VDC |
| 1791076964 | 0 Count | 35 Count | 0 Count | 0 VDC | 0 VDC |
| 1791075164 | 0 Count | 33 Count | 0 Count | 0 VDC | 0 VDC |
| 1791073364 | 0 Count | 31 Count | 0 Count | 0 VDC | 0 VDC |
| 1791071564 | 0 Count | 29 Count | 0 Count | 0 VDC | 0 VDC |
| 1791069764 | 0 Count | 27 Count | 0 Count | 0 VDC | 0 VDC |
| 1791067964 | 0 Count | 25 Count | 0 Count | 0 VDC | 0 VDC |
| 1791066164 | 0 Count | 23 Count | 0 Count | 0 VDC | 0 VDC |
| 1791064364 | 0 Count | 21 Count | 0 Count | 0 VDC | 0 VDC |
| 1791062564 | 0 Count | 19 Count | 0 Count | 0 VDC | 0 VDC |
| 1791060764 | 0 Count | 17 Count | 0 Count | 0 VDC | 0 VDC |
| 1791058964 | 0 Count | 15 Count | 0 Count | 0 VDC | 0 VDC |
| 1791057164 | 0 Count | 13 Count | 0 Count | 0 VDC | 0 VDC |
| 1791055364 | 0 Count | 11 Count | 0 Count | 0 VDC | 0 VDC |
| 1791053564 | 0 Count | 9 Count | 0 Count | 0 VDC | 0 VDC |
| 1791051764 | 0 Count | 7 Count | 0 Count | 0 VDC | 0 VDC |
| 1791049964 | 0 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)