This is the latest recevied telemetry packets stored in our database for station/object LZ1PKZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785820332 | 99 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785818527 | 98 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785816722 | 97 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785814917 | 96 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785813112 | 95 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785811308 | 94 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785809503 | 93 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785807815 | 92 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785806010 | 91 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785804205 | 90 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785802400 | 89 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785800595 | 88 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785796985 | 86 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785795180 | 85 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785793375 | 84 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785791570 | 83 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785789765 | 82 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785787960 | 81 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785786155 | 80 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785784350 | 79 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785782545 | 78 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785780740 | 77 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785778935 | 76 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785777130 | 75 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1785775325 | 74 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)