This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769628868 | 3 Count | 4 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1769627066 | 2 Count | 1 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1769625295 | 1 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1769623493 | 0 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1769621690 | 176 Count | 1011 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1769619887 | 173 Count | 1000 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1769618084 | 172 Count | 999 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1769616282 | 171 Count | 999 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1769614479 | 170 Count | 999 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1769612676 | 169 Count | 999 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1769610873 | 168 Count | 998 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1769609070 | 167 Count | 998 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1769607268 | 166 Count | 997 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1769605465 | 165 Count | 996 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1769603694 | 164 Count | 974 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1769601892 | 163 Count | 960 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1769600089 | 162 Count | 954 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1769598286 | 161 Count | 949 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1769596483 | 160 Count | 949 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1769594681 | 159 Count | 948 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1769592878 | 158 Count | 943 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1769591075 | 157 Count | 938 Count | 0 Count | 4.31 VDC | 0.14 VDC |
| 1769589272 | 156 Count | 936 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1769587469 | 155 Count | 934 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1769585667 | 154 Count | 933 Count | 0 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)