This is the latest recevied telemetry packets stored in our database for station/object F4DIW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769641864 | 416 Count | 470 Count | 333 Count | 0.28 VDC | 0 VDC |
| 1769640063 | 412 Count | 465 Count | 330 Count | 0.28 VDC | 0 VDC |
| 1769638263 | 408 Count | 460 Count | 327 Count | 0.28 VDC | 0 VDC |
| 1769636462 | 404 Count | 456 Count | 324 Count | 0.28 VDC | 0 VDC |
| 1769634662 | 394 Count | 445 Count | 315 Count | 0.28 VDC | 0 VDC |
| 1769634654 | 394 Count | 445 Count | 315 Count | 0.28 VDC | 0 VDC |
| 1769634638 | 394 Count | 445 Count | 315 Count | 0.28 VDC | 0 VDC |
| 1769633081 | 393 Count | 445 Count | 315 Count | 0.28 VDC | 0 VDC |
| 1769631281 | 389 Count | 440 Count | 312 Count | 0.28 VDC | 0 VDC |
| 1769629480 | 385 Count | 435 Count | 309 Count | 0.28 VDC | 0 VDC |
| 1769627680 | 381 Count | 430 Count | 306 Count | 0.28 VDC | 0 VDC |
| 1769625879 | 377 Count | 425 Count | 303 Count | 0.28 VDC | 0 VDC |
| 1769624079 | 373 Count | 420 Count | 300 Count | 0.28 VDC | 0 VDC |
| 1769622278 | 369 Count | 415 Count | 297 Count | 0.28 VDC | 0 VDC |
| 1769620478 | 366 Count | 411 Count | 295 Count | 0.28 VDC | 0 VDC |
| 1769618677 | 362 Count | 406 Count | 292 Count | 0.28 VDC | 0 VDC |
| 1769616876 | 358 Count | 401 Count | 289 Count | 0.28 VDC | 0 VDC |
| 1769615076 | 354 Count | 397 Count | 286 Count | 0.28 VDC | 0 VDC |
| 1769613275 | 350 Count | 392 Count | 283 Count | 0.28 VDC | 0 VDC |
| 1769611475 | 346 Count | 387 Count | 280 Count | 0.28 VDC | 0 VDC |
| 1769609674 | 342 Count | 382 Count | 277 Count | 0.28 VDC | 0 VDC |
| 1769607874 | 338 Count | 377 Count | 274 Count | 0.28 VDC | 0 VDC |
| 1769606073 | 334 Count | 373 Count | 271 Count | 0.28 VDC | 0 VDC |
| 1769604273 | 330 Count | 368 Count | 268 Count | 0.28 VDC | 0 VDC |
| 1769604265 | 330 Count | 368 Count | 268 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)