This is the latest recevied telemetry packets stored in our database for station/object SP6ZWR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775244794 | 24 C | 24.48 % | 1017.63 hPa | 0 | 0 |
| 1775244745 | 23.4 C | 25.16 % | 1018.75 hPa | 0 | 0 |
| 1775244709 | 23.4 C | 25.16 % | 1018.75 hPa | 0 | 0 |
| 1775244674 | 22.7 C | 25.67 % | 1018.25 hPa | 0 | 0 |
| 1775244651 | 22.7 C | 25.67 % | 1018.38 hPa | 0 | 0 |
| 1775244638 | 21.9 C | 26.73 % | 1018.75 hPa | 0 | 0 |
| 1775244598 | 21.9 C | 26.73 % | 1017.5 hPa | 0 | 0 |
| 1775244574 | 20.8 C | 27.79 % | 1017.5 hPa | 0 | 0 |
| 1775244554 | 20.8 C | 27.79 % | 1017.75 hPa | 0 | 0 |
| 1775244526 | 20.8 C | 27.79 % | 1017.88 hPa | 0 | 0 |
| 1775244513 | 19 C | 29.57 % | 1018.25 hPa | 0 | 0 |
| 1775244463 | 19 C | 29.57 % | 1016.25 hPa | 0 | 0 |
| 1775243831 | 18.9 C | 27.31 % | 1017.13 hPa | 0 | 0 |
| 1775242029 | 21.6 C | 24.87 % | 1017.25 hPa | 0 | 0 |
| 1775241128 | 26.4 C | 21.08 % | 1016.88 hPa | 0 | 0 |
| 1775241072 | 25.9 C | 21.72 % | 1016.63 hPa | 0 | 0 |
| 1775241053 | 25.9 C | 21.72 % | 1017 hPa | 0 | 0 |
| 1775241052 | 25.3 C | 21.74 % | 1017.38 hPa | 0 | 0 |
| 1775240933 | 24.6 C | 22.39 % | 1016.63 hPa | 0 | 0 |
| 1775240912 | 23.8 C | 22.81 % | 1016.88 hPa | 0 | 0 |
| 1775240816 | 22.7 C | 23.66 % | 1017.5 hPa | 0 | 0 |
| 1775240790 | 21 C | 25.63 % | 1016.38 hPa | 0 | 0 |
| 1775240771 | 21 C | 25.63 % | 1017.38 hPa | 0 | 0 |
| 1775240733 | 19.5 C | 25.95 % | 1016.5 hPa | 0 | 0 |
| 1775240719 | 19.5 C | 25.95 % | 1016.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)