This is the latest recevied telemetry packets stored in our database for station/object BURNTM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785817930 | 4.26 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1785817326 | 4.26 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1785816725 | 4.26 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1785816125 | 4.26 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1785815524 | 4.26 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1785814924 | 4.26 VDC | 1.3 VDC | 0 | 0 | 0 |
| 1785814324 | 4.26 VDC | 1.3 VDC | 0 | 0 | 0 |
| 1785813724 | 4.26 VDC | 1.3 VDC | 0 | 0 | 0 |
| 1785813123 | 4.27 VDC | 1.34 VDC | 0 | 0 | 0 |
| 1785812522 | 4.27 VDC | 1.52 VDC | 0 | 0 | 0 |
| 1785811922 | 4.27 VDC | 3.1 VDC | 0 | 0 | 0 |
| 1785811322 | 4.27 VDC | 5.42 VDC | 0 | 0 | 0 |
| 1785810722 | 4.27 VDC | 7.46 VDC | 0 | 0 | 0 |
| 1785810122 | 4.28 VDC | 12.08 VDC | 0 | 0 | 0 |
| 1785809522 | 4.28 VDC | 14.1 VDC | 0 | 0 | 0 |
| 1785808921 | 4.28 VDC | 15.28 VDC | 0 | 0 | 0 |
| 1785808322 | 4.28 VDC | 16.12 VDC | 0 | 0 | 0 |
| 1785807722 | 4.28 VDC | 16.64 VDC | 0 | 0 | 0 |
| 1785807122 | 4.28 VDC | 17.08 VDC | 0 | 0 | 0 |
| 1785806522 | 4.28 VDC | 17.34 VDC | 0 | 0 | 0 |
| 1785805920 | 4.29 VDC | 17.56 VDC | 0 | 0 | 0 |
| 1785805324 | 4.29 VDC | 17.76 VDC | 0 | 0 | 0 |
| 1785804720 | 4.29 VDC | 17.94 VDC | 0 | 0 | 0 |
| 1785804120 | 4.29 VDC | 18.08 VDC | 0 | 0 | 0 |
| 1785803520 | 4.29 VDC | 18.22 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)