This is the latest recevied telemetry packets stored in our database for station/object VA6TAC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1776281976 | 13.65 Volts | 15.36 Deg.C | 0 | 0 | 0 |
| 1776281857 | 13.51 Volts | 13.89 Deg.C | 0 | 0 | 0 |
| 1776281509 | 13.68 Volts | 12.92 Deg.C | 0 | 0 | 0 |
| 1776275793 | 13.42 Volts | 21.23 Deg.C | 0 | 0 | 0 |
| 1776275672 | 13.62 Volts | 20.74 Deg.C | 0 | 0 | 0 |
| 1776275553 | 13.6 Volts | 19.76 Deg.C | 0 | 0 | 0 |
| 1776275433 | 13.65 Volts | 18.29 Deg.C | 0 | 0 | 0 |
| 1776275034 | 13.42 Volts | 18.78 Deg.C | 0 | 0 | 0 |
| 1776274794 | 13.51 Volts | 16.34 Deg.C | 0 | 0 | 0 |
| 1776274674 | 13.57 Volts | 14.87 Deg.C | 0 | 0 | 0 |
| 1776274147 | 13.6 Volts | 14.87 Deg.C | 0 | 0 | 0 |
| 1776274022 | 13.6 Volts | 12.92 Deg.C | 0 | 0 | 0 |
| 1776273514 | 13.57 Volts | 7.54 Deg.C | 0 | 0 | 0 |
| 1776272646 | 13.62 Volts | 9 Deg.C | 0 | 0 | 0 |
| 1776271898 | 13.54 Volts | 9.49 Deg.C | 0 | 0 | 0 |
| 1776271778 | 13.65 Volts | 8.03 Deg.C | 0 | 0 | 0 |
| 1776269486 | 13.83 Volts | 4.6 Deg.C | 0 | 0 | 0 |
| 1776269367 | 13.86 Volts | 2.16 Deg.C | 0 | 0 | 0 |
| 1776220632 | 13.51 Volts | 20.74 Deg.C | 0 | 0 | 0 |
| 1776220514 | 13.48 Volts | 20.25 Deg.C | 0 | 0 | 0 |
| 1776220274 | 13.71 Volts | 15.85 Deg.C | 0 | 0 | 0 |
| 1776217342 | 13.68 Volts | 25.63 Deg.C | 0 | 0 | 0 |
| 1776217222 | 13.45 Volts | 25.63 Deg.C | 0 | 0 | 0 |
| 1776217103 | 13.42 Volts | 25.14 Deg.C | 0 | 0 | 0 |
| 1776216983 | 13.45 Volts | 24.65 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)