This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785841977 | 0 Count | 229 Count | 0 Count | 0 VDC | 0 VDC |
| 1785841074 | 0 Count | 228 Count | 0 Count | 0 VDC | 0 VDC |
| 1785840172 | 0 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1785839270 | 0 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1785838368 | 0 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1785837465 | 0 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1785836563 | 0 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1785835661 | 0 Count | 223 Count | 0 Count | 0 VDC | 0 VDC |
| 1785834758 | 0 Count | 221 Count | 0 Count | 0 VDC | 0 VDC |
| 1785833856 | 0 Count | 220 Count | 0 Count | 0 VDC | 0 VDC |
| 1785832954 | 0 Count | 219 Count | 0 Count | 0 VDC | 0 VDC |
| 1785832052 | 0 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1785831150 | 0 Count | 204 Count | 0 Count | 0 VDC | 0 VDC |
| 1785830247 | 0 Count | 203 Count | 0 Count | 0 VDC | 0 VDC |
| 1785829345 | 0 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1785828497 | 0 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1785827594 | 0 Count | 201 Count | 0 Count | 0 VDC | 0 VDC |
| 1785826692 | 0 Count | 200 Count | 0 Count | 0 VDC | 0 VDC |
| 1785825790 | 0 Count | 199 Count | 0 Count | 0 VDC | 0 VDC |
| 1785824888 | 0 Count | 198 Count | 0 Count | 0 VDC | 0 VDC |
| 1785823986 | 0 Count | 182 Count | 0 Count | 0 VDC | 0 VDC |
| 1785823083 | 0 Count | 181 Count | 0 Count | 0 VDC | 0 VDC |
| 1785822181 | 0 Count | 180 Count | 0 Count | 0 VDC | 0 VDC |
| 1785821279 | 0 Count | 176 Count | 0 Count | 0 VDC | 0 VDC |
| 1785820377 | 0 Count | 175 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)