This is the latest recevied telemetry packets stored in our database for station/object IZ1ZCT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780587320 | 2.99 VDC | 0 | 0 | 0 | 0 |
| 1780585513 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1780584607 | 3.27 VDC | 0 | 0 | 0 | 0 |
| 1780583702 | 3.32 VDC | 0 | 0 | 0 | 0 |
| 1780582798 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1780581893 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1780581772 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1780581752 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1780581734 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1780581663 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1780581647 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1780581629 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1780581128 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1780580224 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1780580127 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1780579727 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1780579286 | 2.98 VDC | 0 | 0 | 0 | 0 |
| 1780579270 | 2.98 VDC | 0 | 0 | 0 | 0 |
| 1780579033 | 2.96 VDC | 0 | 0 | 0 | 0 |
| 1780579011 | 2.95 VDC | 0 | 0 | 0 | 0 |
| 1780577933 | 3.04 VDC | 0 | 0 | 0 | 0 |
| 1780577027 | 3.14 VDC | 0 | 0 | 0 | 0 |
| 1780576123 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1780575218 | 3.28 VDC | 0 | 0 | 0 | 0 |
| 1780574315 | 3.34 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)