This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775201016 | 94 Count | 342 Count | 55 Count | 0 VDC | 0.08 VDC |
| 1775200113 | 91 Count | 331 Count | 53 Count | 0 VDC | 0.08 VDC |
| 1775199210 | 90 Count | 326 Count | 53 Count | 0 VDC | 0.08 VDC |
| 1775198307 | 87 Count | 314 Count | 51 Count | 0 VDC | 0.08 VDC |
| 1775197405 | 84 Count | 303 Count | 49 Count | 0 VDC | 0.08 VDC |
| 1775196502 | 81 Count | 292 Count | 47 Count | 0 VDC | 0.08 VDC |
| 1775195599 | 79 Count | 282 Count | 46 Count | 0 VDC | 0.08 VDC |
| 1775194703 | 76 Count | 272 Count | 44 Count | 0 VDC | 0.08 VDC |
| 1775193793 | 73 Count | 262 Count | 42 Count | 0 VDC | 0.08 VDC |
| 1775191987 | 69 Count | 248 Count | 40 Count | 0 VDC | 0.08 VDC |
| 1775191084 | 68 Count | 245 Count | 40 Count | 0 VDC | 0.08 VDC |
| 1775190181 | 66 Count | 235 Count | 39 Count | 0 VDC | 0.08 VDC |
| 1775189278 | 63 Count | 225 Count | 37 Count | 0 VDC | 0.08 VDC |
| 1775188375 | 60 Count | 214 Count | 35 Count | 0 VDC | 0.08 VDC |
| 1775187542 | 54 Count | 206 Count | 34 Count | 0 VDC | 0.08 VDC |
| 1775186639 | 51 Count | 196 Count | 32 Count | 0 VDC | 0.08 VDC |
| 1775185736 | 48 Count | 184 Count | 30 Count | 0 VDC | 0.08 VDC |
| 1775184834 | 47 Count | 177 Count | 30 Count | 0 VDC | 0.08 VDC |
| 1775183930 | 45 Count | 169 Count | 29 Count | 0 VDC | 0.08 VDC |
| 1775183027 | 42 Count | 159 Count | 27 Count | 0 VDC | 0.08 VDC |
| 1775182124 | 39 Count | 148 Count | 25 Count | 0 VDC | 0.08 VDC |
| 1775181221 | 37 Count | 139 Count | 24 Count | 0 VDC | 0.08 VDC |
| 1775180318 | 34 Count | 128 Count | 22 Count | 0 VDC | 0.08 VDC |
| 1775179415 | 31 Count | 117 Count | 20 Count | 0 VDC | 0.08 VDC |
| 1775178512 | 29 Count | 109 Count | 19 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)