This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1769669112 | 3.98 VDC | 3 C | 78.74 % | 1000.5 hPa | 0 |
| 1769668809 | 3.98 VDC | 3 C | 78.99 % | 999.88 hPa | 0 |
| 1769668506 | 3.98 VDC | 3 C | 78.86 % | 999.13 hPa | 0 |
| 1769668204 | 3.98 VDC | 3 C | 78.9 % | 998.75 hPa | 0 |
| 1769667900 | 3.98 VDC | 3 C | 78.74 % | 999.88 hPa | 0 |
| 1769667597 | 3.98 VDC | 3 C | 78.82 % | 1000.25 hPa | 0 |
| 1769667294 | 3.98 VDC | 3 C | 78.78 % | 1000.38 hPa | 0 |
| 1769666991 | 3.98 VDC | 3 C | 78.95 % | 999.63 hPa | 0 |
| 1769666688 | 3.99 VDC | 3 C | 78.88 % | 1000.13 hPa | 0 |
| 1769666385 | 3.99 VDC | 3 C | 79.02 % | 1000.5 hPa | 0 |
| 1769666082 | 3.98 VDC | 3 C | 78.77 % | 1000.75 hPa | 0 |
| 1769665779 | 3.98 VDC | 3 C | 78.73 % | 1000.13 hPa | 0 |
| 1769665476 | 3.98 VDC | 3 C | 78.94 % | 999.25 hPa | 0 |
| 1769665173 | 3.98 VDC | 3 C | 79.02 % | 1000.13 hPa | 0 |
| 1769664870 | 3.99 VDC | 3 C | 78.75 % | 997.25 hPa | 0 |
| 1769663961 | 3.99 VDC | 3 C | 78.82 % | 998.88 hPa | 0 |
| 1769663355 | 3.98 VDC | 3 C | 78.79 % | 999.88 hPa | 0 |
| 1769663052 | 3.99 VDC | 3 C | 78.71 % | 999.38 hPa | 0 |
| 1769662749 | 3.99 VDC | 3 C | 78.84 % | 1000.25 hPa | 0 |
| 1769662144 | 3.98 VDC | 3.1 C | 78.7 % | 998.25 hPa | 0 |
| 1769661840 | 3.99 VDC | 3.1 C | 79.03 % | 998.25 hPa | 0 |
| 1769661544 | 3.99 VDC | 3.1 C | 78.92 % | 999.88 hPa | 0 |
| 1769660931 | 3.99 VDC | 3.1 C | 79.04 % | 998.88 hPa | 0 |
| 1769660628 | 3.99 VDC | 3.1 C | 78.92 % | 998.75 hPa | 0 |
| 1769660325 | 3.99 VDC | 3.1 C | 78.76 % | 998.88 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)