This is the latest recevied telemetry packets stored in our database for station/object ON3FV-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775232760 | 12 Nr | 12.86 Vdc | 0 | 0 | 0 |
| 1775232460 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232450 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232440 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232420 | 12 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1775232280 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232265 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232250 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232240 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232230 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232215 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232200 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232190 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232180 | 12 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232170 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232160 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232150 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232140 | 13 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1775232130 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232120 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232110 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232095 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775232080 | 12 Nr | 13.95 Vdc | 0 | 0 | 0 |
| 1775232015 | 12 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1775231840 | 10 Nr | 13.95 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)