This is the latest recevied telemetry packets stored in our database for station/object YC1SDZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Satellite* | Value5* |
|---|---|---|---|---|---|
| 1775235381 | 36 °C | 44 %RH | 1004 hPa | 8 Sat | 0 |
| 1775233481 | 37 °C | 44 %RH | 1004 hPa | 10 Sat | 0 |
| 1775231581 | 37 °C | 44 %RH | 1004 hPa | 10 Sat | 0 |
| 1775229681 | 37 °C | 44 %RH | 1004 hPa | 9 Sat | 0 |
| 1775227781 | 37 °C | 44 %RH | 1004 hPa | 11 Sat | 0 |
| 1775225881 | 37 °C | 44 %RH | 1004 hPa | 8 Sat | 0 |
| 1775223981 | 37 °C | 45 %RH | 1003 hPa | 9 Sat | 0 |
| 1775222083 | 34 °C | 57 %RH | 1003 hPa | 10 Sat | 0 |
| 1775220182 | 34 °C | 59 %RH | 1003 hPa | 10 Sat | 0 |
| 1775218282 | 34 °C | 56 %RH | 1002 hPa | 9 Sat | 0 |
| 1775216382 | 34 °C | 55 %RH | 1001 hPa | 11 Sat | 0 |
| 1775214482 | 35 °C | 54 %RH | 1001 hPa | 9 Sat | 0 |
| 1775212582 | 34 °C | 47 %RH | 1000 hPa | 9 Sat | 0 |
| 1775210682 | 35 °C | 46 %RH | 999 hPa | 12 Sat | 0 |
| 1775208782 | 35 °C | 46 %RH | 999 hPa | 12 Sat | 0 |
| 1775206882 | 35 °C | 45 %RH | 999 hPa | 12 Sat | 0 |
| 1775204982 | 35 °C | 43 %RH | 999 hPa | 12 Sat | 0 |
| 1775203082 | 36 °C | 40 %RH | 999 hPa | 12 Sat | 0 |
| 1775201182 | 37 °C | 39 %RH | 999 hPa | 12 Sat | 0 |
| 1775199283 | 36 °C | 42 %RH | 1000 hPa | 12 Sat | 0 |
| 1775197387 | 35 °C | 44 %RH | 1000 hPa | 11 Sat | 0 |
| 1775195483 | 38 °C | 42 %RH | 1001 hPa | 10 Sat | 0 |
| 1775193583 | 37 °C | 42 %RH | 1001 hPa | 8 Sat | 0 |
| 1775191683 | 35 °C | 44 %RH | 1002 hPa | 10 Sat | 0 |
| 1775189783 | 35 °C | 43 %RH | 1002 hPa | 11 Sat | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)