APRS Track Direct

My position About ☰

reset

SP8G-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*
1769673904	6 Count	11 Count	6 Count
1769673603	792 Count	1003 Count	612 Count
1769673303	785 Count	992 Count	606 Count
1769672701	770 Count	968 Count	593 Count
1769672401	767 Count	963 Count	591 Count
1769672101	763 Count	958 Count	588 Count
1769671799	760 Count	953 Count	586 Count
1769671498	756 Count	949 Count	583 Count
1769671199	752 Count	944 Count	580 Count
1769670897	748 Count	939 Count	577 Count
1769670598	745 Count	934 Count	575 Count
1769670295	740 Count	927 Count	571 Count
1769669994	737 Count	922 Count	569 Count
1769669393	729 Count	912 Count	563 Count
1769669093	725 Count	908 Count	560 Count
1769668792	722 Count	903 Count	558 Count
1769668491	717 Count	897 Count	554 Count
1769668191	714 Count	893 Count	552 Count
1769667889	711 Count	889 Count	550 Count
1769667590	706 Count	882 Count	546 Count
1769667288	703 Count	878 Count	544 Count
1769666987	699 Count	872 Count	541 Count
1769666687	695 Count	867 Count	538 Count
1769666386	691 Count	861 Count	535 Count
1769666086	688 Count	857 Count	533 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)